器件名称

热搜:

产品SN74ABT1864贸泽
描述

The 'ABT18640 scan test devices with 18-bit inverting bus transceivers are members of the Texas Instruments SCOPETM testability integrated-circuit family. This family of devices supports IEEE Standard 1149.1-1990 boundary scan to facilitate testing of complex circuit-board assemblies. Scan access to the test circuitry is accomplished via the 4-wire test access port (TAP) interface. In the normal mode, these devices are 18-bit inverting bus transceivers. They can be used either as two 9-bit transceivers or one 18-bit transceiver. The test circuitry can be activated by the TAP to take snapshot samples of the data appearing at the device pins or to perform a self test on the boundary-test cells. Activating the TAP in the normal mode does not affect the functional operation of the SCOPETM bus transceivers. Data flow is controlled by the direction-control (DIR) and output-enable () inputs. Data transmission is allowed from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at DIR. can be used to disable the device so that the buses are effectively isolated. In the test mode, the normal operation of the SCOPETM bus transceivers is inhibited and the test circuitry is enabled to observe and control the I/O boundary of the device. When enabled, the test circuitry can perform boundary-scan test operations according to the protocol described in IEEE Standard 1149.1-1990.   Four dedicated test pins observe and control the operation of the test circuitry: test data input (TDI), test data output (TDO), test mode select (TMS), and test clock (TCK). Additionally, the test circuitry performs other testing functions such as parallel-signature analysis (PSA) on data inputs and pseudo-random pattern generation (PRPG) from data outputs. All testing and scan operations are synchronized to the TAP interface. The SN74ABT18640 is available in TI's shrink small-outline (DL) and thin shrink small-outline (DGG) packages, which provide twice the I/O pin count and functionality of standard small-outline packages in the same printed-circuit-board area. The SN54ABT18640 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ABT18640 is characterized for operation from -40°C to 85°C.    

操作查看详情点击下载购买

器件类型,热量管理,

热量管理

12345 > 尾页
跳至PAGE
制造商型号分类描述下载
ADDA

ADDA

AD0512HB-G76(T)...热量管理风扇与鼓风机DC fans 52mm 12vdc 11.9cfm
ADDA

ADDA

AD0612HB-A72GL-...热量管理风扇与鼓风机DC fans 60mm 12vdc alrm byic
ADDA

ADDA

AD0812DB-A70GLL...热量管理风扇与鼓风机DC fans 80mm 12vdc ball brg
ADDA

ADDA

AD0712MB-D70-LF热量管理风扇与鼓风机DC fans 70mm 12vdc
ADDA

ADDA

AD1212MS-A73GL-...热量管理风扇与鼓风机DC fans 120x25 12v med slv
ADDA

ADDA

AS12024UB-25A10...热量管理风扇与鼓风机DC fans DC fan 120x120x25mm 24v 175.9 cfm
ADDA

ADDA

AD0305HB-D50-LF热量管理风扇与鼓风机DC fans 5vdc 0.13a 0.65w 7000rpm ball bearing
ADDA

ADDA

AD0524LB-G70(T)...热量管理风扇与鼓风机DC fans 50x10 24vdc
ADDA

ADDA

AD0524HB-G70(TS...热量管理风扇与鼓风机DC fans 52x10mm 24vdc 1ball/1sleeve bear
ADDA

ADDA

AD0624HB-D71GL-...热量管理风扇与鼓风机DC fans 60x15 24vdc 15.82cfm
ADDA

ADDA

AD0305DB-G50-LF热量管理风扇与鼓风机DC fans 30mm 5vdc 2.18cfm
ADDA

ADDA

AD0712MX-D70-LF热量管理风扇与鼓风机DC fans .18 amp
ADDA

ADDA

AD0212LX-G53GL-...热量管理风扇与鼓风机DC fans 25mm 12vdc 1.8cfm
ADDA

ADDA

AD0912HB-C71-LF热量管理风扇与鼓风机DC fans 92x20mm 12vdc high speed
ADDA

ADDA

AA1281DB-AT-LF热量管理风扇与鼓风机AC fans 120x38 115vac ultra low ball
ADDA

ADDA

AD2012LB-G70-LF热量管理风扇与鼓风机DC fans 20mm 12vdc impedence
ADDA

ADDA

AD1224HB-Y51-LF热量管理风扇与鼓风机DC fans 120mmx32mm 24v
ADDA

ADDA

AD0205LX-K50(X)...热量管理风扇与鼓风机DC fans 25mm 5vdc 1.8cfm hypro bearing
ADDA

ADDA

AD0405LX-G70-LF热量管理风扇与鼓风机DC fans 40x10 5V
ADDA

ADDA

AD0205MB-G50GL(...热量管理风扇与鼓风机DC fans 5V 0.12a ball/sleeve
ADDA

ADDA

AD0412UB-G76-LF热量管理风扇与鼓风机DC fans 40mm 12vdc
ADDA

ADDA

AD0405MX-KC3(Y1...热量管理风扇与鼓风机DC fans bracket fan
ADDA

ADDA

AD2005DB-K70(S)...热量管理风扇与鼓风机DC fans 20mm 5vdc 0.4cfm
ADDA

ADDA

AD0924UB-A72GL-...热量管理风扇与鼓风机DC fans 92mm 24v ultraspd ball bearing
ADDA

ADDA

AD2512MS-LF热量管理风扇与鼓风机DC fans DC blower 120x32mm 12v mediumspd slvbr
12345 > 尾页
跳至PAGE