器件名称详细搜索
产品SN54HC191TI
描述

The 'HC191 devices are 4-bit synchronous, reversible, up/down binary counters. Synchronous counting operation is provided by having all flip-flops clocked simultaneously so that the outputs change coincident with each other when instructed by the steering logic. This mode of operation eliminates the output counting spikes normally associated with asynchronous (ripple-clock) counters. The outputs of the four flip-flops are triggered on a low- to high-level transition of the clock (CLK) input if the count-enable (CTEN) input is low. A high at CTEN inhibits counting. The direction of the count is determined by the level of the down/up (D/U) input. When D/U is low, the counter counts up, and when D/U is high, it counts down. These counters feature a fully independent clock circuit. Change at the control (CTEN and D/U) inputs that modifies the operating mode have no effect on the contents of the counter until clocking occurs. The function of the counter is dictated solely by the condition meeting the stable setup and hold times. These counters are fully programmable; that is, each of the outputs can be preset to either level by placing a low on the load (LOAD) input and entering the desired data at the data inputs. The output changes to agree with the data inputs independently of the level of CLK. This feature allows the counters to be used as modulo-N dividers simply by modifying the count length with the preset inputs. Two outputs are available to perform the cascading function: ripple clock (RCO) and maximum/minimum (MAX/MIN) count. MAX/MIN produces a high-level output pulse with a duration approximately equal to one complete cycle of the clock while the count is zero (all outputs low) counting down, or maximum (9 or 15) counting up. RCO produces a low-level output pulse under those same conditions, but only while CLK is low. The counters can be cascaded easily by feeding RCO to CTEN of the succeeding counter if parallel clocking is used, or to CLK if parallel enabling is used. MAX/MIN can be used to accomplish look ahead for high-speed operation.

操作查看详情点击下载购买

目录

03990123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ
12345 > 尾页
跳至PAGE
制造商型号分类描述下载
Molex

Molex

0399400423连接器接线座 - 接头,插头和插口term block plug 23pos 5.08mm
Molex

Molex

0399300218连接器接线座 - 接头,插头和插口term block plug 18pos 3.81mm
Molex

Molex

0399810315连接器接线座 - 接头,插头和插口term block plug 15pos 5.08mm
Molex

Molex

0399900309连接器接线座 - 接头,插头和插口term block plug 9pos 90deg 5mm
Molex

Molex

0399700304连接器接线板 - 线至板conn term block 4pos 10.16mm
Molex

Molex

0399400217连接器接线座 - 接头,插头和插口term block plug 17pos 5.08mm
Molex

Molex

0399400212连接器接线座 - 接头,插头和插口term block plug 12pos 5.08mm
Molex

Molex

0399100314连接器接线板 - 线至板conn term block 14pos 10.16mm
Molex

Molex

0399100106连接器接线板 - 线至板conn term block 6pos 10.16mm 60a
Mill-Max

Mill-Max

0399-1-15-80-47...连接器IC 与器件插座IC & component sockets 200u SN over NI 47 con
Molex

Molex

0399100304连接器接线板 - 线至板conn term block 4pos 10.16mm
Molex

Molex

0399100305连接器接线板 - 线至板conn term block 5pos 10.16mm
Molex

Molex

0399800407连接器接线座 - 接头,插头和插口term block hdr 7pos vert 5.08mm
Molex

Molex

0399400211连接器接线座 - 接头,插头和插口term block plug 11pos 5.08mm
Molex

Molex

0399900302连接器接线座 - 接头,插头和插口term block plug 2pos 90deg 5mm
Molex

Molex

0399200704连接器接线板 - 线至板conn term block 4pos 15mm 1-8awg
Molex

Molex

0399810314连接器接线座 - 接头,插头和插口term block plug 14pos 5.08mm
Molex

Molex

0399800312连接器接线座 - 接头,插头和插口term block plug 12pos 5.08mm
Mill-Max

Mill-Max

0399-0-15-01-47...连接器IC 与器件插座IC & component sockets 200u sn/pb over NI 47 con
Molex

Molex

0399810317连接器接线座 - 接头,插头和插口term block plug 17pos 5.08mm
Molex

Molex

0399810319连接器接线座 - 接头,插头和插口term block plug 19pos 5.08mm
Molex

Molex

0399900406连接器接线座 - 接头,插头和插口term block hdr 6pos vert 5mm
Molex

Molex

0399000506连接器接线座 - 接头,插头和插口term block hdr 6pos vert 3.81mm
Molex

Molex

0399900304连接器接线座 - 接头,插头和插口term block plug 4pos 90deg 5mm
Molex

Molex

0399810312连接器接线座 - 接头,插头和插口term block plug 12pos 5.08mm
12345 > 尾页
跳至PAGE